Email:eshop@aaeon.com
Language
ECB-920A-A11
COM Express Evaluation Carrier Board (Type 6/Type 10)
US$485.00
Availability:
Pre-Order
Only 6 left
SKU
ECB-920A-A11-0001
【Pre-Order】 Lead Time: 8 weeks
- ATX Form Factor (305mm × 244mm)
- Supports COM Express Rev3.0, Pin out Type 6/Type 10
- PCIe [x16] x 1, PCIe [x4] x 2
- VGA Port x 1, LVDS, eDP, Display Port x 3
- USB 2.0 x 4, USB 3.2/2.0 x 4
- SATA III x 4
- RJ-45 GbE x 1, Supports up to 2.5GbE
- High Definition Audio
- LPC/eSPI Slot, GPIO/SDIO, SMBus x 1, I2C x 1
- COM Port x 2 (2-Wire UART Tx/Rx), GPIO 8-bit
The ECB-920A is a ATX form factor board supporting Type 6 and Type 10 COM Express Modules. AAEON's standard carrier boards can be used in their default configuration or as a starting point for a custom carrier design reducing the cost and time of development. Common uses of a standard carrier are proof-of-concept and software validation which gives any project a jump start to improve time to market.ECB-920A offers one 2.5 GbE port, four SATA ports, eight USB 2.0 ports and four USB3.0 ports for expedited integration.
| SYSTEM | |
| FORM FACTOR | ATX Form Factor |
| COM Express Connector | x 2 (Row A,B & Row C,D) |
| I/O Chipset | — |
| Front Panel Control | 10-pin Header (5x2) |
| ETHERNET | 10/100/1000/2500 Base-TX, RJ45 x 1 (From CPU Module) |
| EXPANSION Interface | PCIe [x4] x 2 PCIe [x16] x 1 |
| Power Supply Type | ATX |
| CMOS Battery | RTC Battery Socket x 1 |
| BIOS | — |
| BOARD SIZE | 12" x 9.6" (304mm x 244mm) |
| GROSS WEIGHT | 1.32 lb. (0.6Kg) |
| OPERATING TEMPERATURE | 32°F ~ 140°F (0°C ~ 60°C) |
| STORAGE TEMPERATURE | -40°F ~ 185°F (-40°C ~ 85°C) |
| OPERATING HUMIDITY | 0% ~ 90% relative humidity, non-condensing |
| MTBF (HOURS) | — |
| DISPLAY | |
| LCD | LVDS: 40-pin Dual-Channel LVDS Connector (20x2) eDP: 30-pin Board Wire Connector |
| Display Interface | Display Port x 3 (Dual x 1, Single x 1) D-SUB15 Connector x 1 |
| I/O | |
| STORAGE | SATA III x 4 |
| SERIAL PORT | COM Port x 2 (2-Wire UART Tx/Rx) |
| USB | USB 2.0 x 4 (Type-A), USB 3.2/2.0 x 4 (Type-A) |
| AUDIO | Audio Jack, supports Line-in, Line-out, Microphone |
| GPIO | 8-bit Programmable |
| Switch/Button | Power Button x 1 / Reset Button x 1 |
| DEBUG LED | 80 PORT |
| I2C | 1 |
| Expansion Interface | LPC, SMBus, eSPI, CAN Bus, 4 pin fan connector, Micro SD Card Slot x 1 |
* I/O functions according to the type of module installed, please refer to function table.
- PER-T603 (COM Express Type Converter Board) x 1
- PER-T604 (PCIe [x4] to PCIe [x1] x 4 Card) x 1
- Cable Kit x 1 (Including SATA Cable x 2, COM Port Cable x 2)
- ECB-920A-A11 x 1
